Textile Cleaning Gun Type B

B-1 Textile Cleaning GunB-2 Textile Cleaning Gun
B-3 Textile Cleaning GunB-4 Textile Cleaning Gun

TENLUXE® Textile Cleaning Gun® Type B-1

  • A stream-lined Nylon shell
  • Light and easy to handle
  • Powerful spray, low solvent consumption and high durability

TENLUXE® Textile Cleaning Gun® Type B-2

  • Fitted with Strength Adjusting Nozzle

TENLUXE®Textile Cleaning Gun® Type B-3

  • Fitted with Strength Adjusting Nozzle
  • B-3 fitted with 2.2m-long transfer pipe to draw solvent directly from the container and make the gun lighter. Suitable for high workloads such as fabric inspection.

TENLUXE® Textile Cleaning Gun® Type B-4

  • Fitted with Strength Adjusting Nozzle
  • B-4 Utilizes water instead of solvent for cutting resin from printing screen.
Product Specifications
The Tenluxe textile cleaning gun removes stains easily. Most oil stains or dust on textiles can be quickly cleaned with the cleaning gun, making hand-washing unnecessary.
Particularly suited to ready-wear factories, textile factories and laundries with medium-to-load workloads.
AC Power Supply : 110V 60Hz / 220V 50Hz / 220V 60Hz Cup Capacity: 800cc

The cleaning gun reciprocates 60 times a second so its performance depends on design, construction and regular maintenance. Each Tenluxe cleaning gun is made from hundreds of precisely engineered parts. Strict quality controls during assembly ensure the highest quality.
  • the Use of the Cleaning Solvents
    1. Step 1 Hold down the trigger switch and the solvent will start spraying after 5 seconds. Keep a distance of 10 ~ 20 cm from the target. Adjust solvent strength by changing the distance.
    2. Step 2 The volume can also be adjusted. Rotate volume control knob anti-clockwise to increase volume. Rotate clockwise to reduce volume and spray strength.
    3. Step 3 Clean from the edges first. For lighter solvents, reduced the volume slightly. If volume is too high actual spray strength is reduced.
    4. Step 4 If the nozzle head is blocked, remove the nozzle head and clear obstruction with a toothpick or another cleaning gun. Do not use a hard metal needle.
  • Type A Pump Cylinder
    • The pump cylinder (see Drawing C) includes wear-resistant copper lining (C ①) and chromium ring (C ②) to deliver a service life of more than 100 million cycles.
    • The oil storage ⑥ allows constant lubrication of the pump to extend piston life.
    • The piston spring (C ⑤) isolates the spring and liquids (C ④) to prevent corrosion.
    • Distinctive impact-resistant nylon housing for thermal protection and ease of cleaning.
    • A variety of nozzles for different applications are available.
  • Type A Part List

    ① Nozzle head 
    ② Swirl head
    ③ Delivery valve spring
    ④ Delivery valve cone
    ⑤ Pump cylinder
    ⑥ Lubricating oil storage 
    ⑦ Piston spring
    ⑧ Piston
    ⑨ Pump unit locking screw
    ⑩ Electric drive unit
    ⑪ Vibrating plate
    ⑫ Vibrating plate spring
    ⑬ Gun cover
    ⑭ Gun cover screw
    ⑮ Heading cover
    ⑯ Lock washer
    ⑰ Adjusting roller spring
    ⑱ Gun body
    ⑲ Terminal block
    ⑳ Electric lead
    ㉑ Tigger switch
    ㉒ Volume control knob
    ㉓ Suction pipe
    ㉔ Cup
    ㉕ Filter
    ㉖ Elongation nozzle head
    ㉗ Bent shape nozzle head
    ㉘ Transfer pipe
    ㉙ Hanging hook
    ㉚ Lubrication hole
    ㉛ Armature buffer stop
At the end of each working day or after a single use, spray a mixture of solvent and 5~10% machine oil to prevent rusting of the pump cylinder. 5 drops of lubricating oil should also be applied to the lubricating hole after every 5 gallons of solvent sprayed.